Apartment electrics in Belgrade: wiring, the board, and what labour excludes
Updated 2026-11-18 · RENOVA
Old aluminium wiring in Belgrade’s housing stock will not carry a hob, an oven and an air conditioner at once. A new layout is drawn before the chase, not “we’ll add a socket on the way”.
What the €20–35/m² rate is
It is labour on the area being redone: new wiring, a board and breakers, lights and sockets to a plan, and the chases closed. The low end is a clear plan and short runs. The high end is many points, a moved board, and weak partitions where a chase is harder. Cable, back boxes, the mechanisms and the lights are bought separately.
A plan before the start
- Separate circuits for the hob, oven, washer, dishwasher and air conditioner.
- Kitchen sockets not on the same circuit as the living room.
- Light points where the furniture will be, not “centred as before”.
- Spare ways in the board. The RCD is not squeezed in as the last row.
A point that is not on the drawing costs more after the plaster than the same point in the quote. A chase through a fresh wall is a new stage, not a favour.
Data and the kitchen
Internet, the entry phone and television are cheaper as an empty conduit next to the power while the walls are open. Kitchen outlets have to sit on the same drawing as the plumbing, or the socket ends up behind the fridge and the tap hard against the board.
How to accept the electrics
Before the walls close: the board is labelled, the circuits test out, the chases are filled, and the points match the sheet. The second 50% of the stage is due after that, not when the sockets “look about right”. Paint over an open chase is a failed handover, not a finish.